|
Drive n sync guitar tube amp.
This amplifier is based on the Dumble Overdrive Special to

satisfy the tone needs of the most demanding pro guitarists. It
delivers
a truly creamy yet sparkling clean tone. Here it begins
to differ from it inspirer: I redesigned the transformer so
that it can achieve great performance in class A; 2 gain stages:
the first for for light overdrive, blues, and fusion tones; the
second for high gain that can go to extreme distortion. This can
be achieved by a push-pull of the volume pot in the drive channel.
It has 2 effects loop in series with the circuit that can be
removed with a switch in the back panel. It has a tube spring reverb
(accutronics); a power switch for full/half operation, speaker outs
for 4, 8, 18 ohms.
The tone and punch out of this amp are incredible, and the noise is
impressively low. A truly great versatile amp.amp. Comes with
footswitch for
reverb and channel selection.
dumble overdrive special clone mods
|
|
|
See what you are acquiring and do some research:
|
Features...
Two Channels
Front panel:
Input fet, input normal
Pots: Volume, Treble, Mid, Bass Master Clean, gain
drive, level drive, presence, reverb
Toggles:Bright,rock, jazz, deep, accent
Back Panel:
power, stand by, triod/pentode, outupts (4,8,16 ohms) send volume, return volume, send return , Foot.
Footswitch:
channel select. reverb
|
Construction caracteristics...
*Chassis in carbon-steel.
* Grain oriented
transformers with no magnetic loss, providing high performance and
perfect harmonics
Ps.We never use regular
transformers.
*Panel with pearlized paint and fine finishing
*Point-to-point circuit
*Metal film resistors, 1-10 watt
* accutronics reverb
*Porcelane socket
*Selected tubes
*Tubes
selected
* dimensions
* Weight
|
|
Dnsh-50w Head 50w (pcb version)
4x 12ax7/-2 x 12at7 -2 x
6l6gc- 1x 5u4g)
U$1700(
Pcb version) |
|
Dnsc-50w
combo 50w 4x 12ax7-2x 12 x 12at7 - 2 x
6l6gc - 2 5u4g rectifier tubes)
U$d2000 |
|
Dnsh-100w Head 100w (pcb version)(4x 12ax7-
2x x 12at7- 4 x
6l6gc 2 5u4g)
U$2300 |
|
|
|